Configuring Park Actions - HIKVISION DS-2TD8166-180ZE2F-V2 User Manual

User Manual of Thermal Network Positioning system
2. Click the PTZ control buttons to find a position as the initial position of the positioning
system; you can also call a defined preset and set it as the initial position of the
positioning system.
3. Click Set to save the position.
Call/delete an Initial Position:

You can click to call the initial position. You can click
and restore the factory default initial position.

7.3.4 Configuring Park Actions

Purpose:
This feature allows the positioning system to start a predefined park action (scan, preset,
pattern and etc.) automatically after a period of inactivity (park time).
Scheduled Tasks function is prior to Park Action function. When these two functions

are set at the same time, only the Scheduled Tasks function takes effect.
varies depending on
 Pattern function
Steps:
1. Enter the Park Action settings interface:
Configuration > PTZ > Park Action
2. Check the checkbox of Enable Park Action.
3. Set the Park Time as the inactivity time of the positioning system before it starts the
park actions.
4. Choose Action Type the from the dropdown list.
5. Select the Action Type ID from the dropdown list.
6. Click
© Hikvision
Figure 7-28 PTZ Configuration
positioning system
Figure 7-29 Set the Park Action
Figure 7-30 Action Types
to save the settings.
98
to delete the initial position
models.