Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
One-touch Patrol
Click
to call one-touch patrol. For detailed information of setting one-touch
patrol, refer to 4.4.5 One-touch Patrol.
One-touch Park
Click
to save the current view as the preset No. 32 and start park at the the
current position.
4.4.3 Setting / Calling a Preset
Purpose:
A preset is a predefined image position. For the defined preset, you can click the calling
button to quickly view the desired image position.
Setting a Preset:
Steps:
1. In the PTZ control panel, select a preset number from the preset list.
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the positioning system to the right or left.
• Tilt the positioning system up or down.
• Zoom in or out.
• Refocus the lens.
3.
Click
to finish the setting of the current preset.
4.
Edit a preset name by double clicking on the default name such as preset 1. (The pre-defined presets
are named already and not configurable. Please refer to the user manual for detailed function
description.)
5. You can click
You can configure up to 256 presets.
Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
preset.
© Hikvision
Figure 4-6 Setting a Preset
to delete the preset.
25
to call the
Advertisement
Table of Contents
