HIKVISION DS-2TD8166-180ZE2F-V2 User Manual page 34

User Manual of Thermal Network Positioning system
For convenient preset selection, refer to the following steps to navigate to the preset you
want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
The following presets are predefined with special commands. You can only call them

but not configure them. For instance, preset 99 is the "Start auto scan". If you call the
preset 99, the positioning system starts auto scan function.
 Pattern function varies depending on the models of positioning system
Preset Function
33 Auto flip
34 Back to initial position
35 Call patrol 1
36 Call patrol 2
37 Call patrol 3
38 Call patrol 4
39 Day mode (IR cut filter in)
40 Night mode (IR cut filter out)
41 Call pattern 1
42 Call pattern 2
43 Call pattern 3
44 Call pattern 4
45 One-touch Patrol
90 Wiper
© Hikvision
Figure 4-7 Calling a Preset
Table 4-4 Special Presets
Preset
92
93
94
95
96
97
98
99
100
101
102
103
104
105
.
Function
Start to set limit stops
Set limit stops manually
Remote reboot
Call OSD menu
Stop a scan
Start random scan
Start frame scan
Start auto scan
Start tilt scan
Start panorama scan
Call patrol 5
Call patrol 6
Call patrol 7
Call patrol 8
26