User Manual of Thermal Network Positioning system
7.
Check the checkbox of Enable Privacy Mask to enable this function.
You are allowed to draw up to 8 areas for the positioning system.
7.3.6 Configuring Scheduled Tasks
Purpose:
You can configure the network positioning system to perform a certain action
automatically in a user-defined time period.
Steps:
1.
Enter the Scheduled Task settings interface:
Configuration> PTZ > Scheduled Tasks
2.
Check the checkbox of Enable Scheduled Task.
3. Set the Park Time. You can set the park time (a period of inactivity) before the
positioning system starts the scheduled tasks.
4. Select the task type from the dropdown list. You can choose scan, preset, pattern and
etc.
© Hikvision
Figure 7-32 Privacy Mask List
Figure 7-33 Configure Scheduled Tasks
100