HIKVISION DS-2TD6267-75C4L/W User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2TD6267-75C4L/W
  6. User manual

HIKVISION DS-2TD6267-75C4L/W User Manual

Thermal & optical bi-spectrum ptz network camera
Hide thumbs Also See for DS-2TD6267-75C4L/W:
Table of Contents

Advertisement

Quick Links

Download this manual
DS-2TD6267-75C4L/W
Thermal & Optical Bi-Spectrum
PTZ Network Camera
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-2TD6267-75C4L/W

Summary of Contents for HIKVISION DS-2TD6267-75C4L/W

  • Page 1 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual...
  • Page 2 INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
  • Page 3 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could result in death or DANGER: serious injury.
  • Page 4 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Maintenance • If the product does not work properly, contact your dealer or the nearest service center. We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.

  • Page 5: Table Of Contents

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Contents Chapter 1 Overview ............................11 1.1. Brief Description............................11 1.2. Functions..............................11 Chapter 2 Device Activation and Accessing ....................12 2.1. Activate the Device via SADP ........................12 2.2.
  • Page 6 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 5.3. Advanced Configuration .......................... 29 Chapter 6 Event and Alarm ..........................30 6.1. Set Motion Detection ..........................30 6.2. Set Video Tampering Alarm ........................32 6.3. Set Alarm Input ............................33 6.4.
  • Page 7 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 8.12. Set Power Off Memory ..........................48 8.13. Set PTZ Priority ............................48 Chapter 9 Live View ............................49 9.1. Live View Parameters ..........................49 9.2. Set Transmission Parameters ........................52 Chapter 10 Video and Audio ..........................
  • Page 8 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 10.2. Display Settings ............................58 10.3. OSD ................................63 10.4. Overlay Picture ............................64 10.5. Set Manual DPC (Defective Pixel Correction) ................... 64 10.6. Set Picture-in-Picture ..........................65 Chapter 11 Video Recording and Picture Capture ................... 66 11.1.
  • Page 9 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 11.3. Capture Configuration ..........................70 Chapter 12 Network Settings ........................... 72 12.1. TCP/IP................................ 72 12.2. Port ................................72 12.3. Port Mapping ............................. 73 12.4. Multicast ..............................74 12.5. SNMP ................................. 74 12.6.
  • Page 10 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 13.9. View Open Source Software License ....................... 82 13.10. Time and Date ............................82 13.11. Set RS-232 ..............................83 13.12. Set RS-485 ..............................83 13.13. Set Same Unit ............................84 13.14.

  • Page 11: Chapter 1 Overview

    1.1. Brief Description Hikvision’s Thermal & Optical Bi-Spectrum PTZ Network Camera integrates a decoder, thermal camera, and high-definition zoom camera. It performs temperature measurement, dynamic fire source detection, and other smart detections in the remote surveillance of power systems, metallurgy systems, petrochemical engineering, etc.

  • Page 12: Chapter 2 Device Activation And Accessing

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Chapter 2 Device Activation and Accessing To protect the security and privacy of the user account and data, set a login password to activate the device when accessing the device via a network.

  • Page 13: Login

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 3. Input 192.168.1.64 in the browser. 4. Set device activation password. STRONG PASSWORD RECOMMENDED − We highly recommend that you create a strong password of your own choosing (using a minimum of eight characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 14: Chapter 3 Temperature Measurement

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Chapter 3 Temperature Measurement This function lets the device measure the actual temperature of the scene. It alarms when the temperature exceeds the temperature threshold value. 3.1. Notice This section introduces the notices of configuring temperature measurement function.

  • Page 15: Automatic Thermography

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Figure 1, Thermography Configuration Flow Chart NOTE: Quick Start Guide Refer to the for detail information of Installation part in the flow chart. 3.2. Automatic Thermography Configure the temperature measurement parameters and temperature measurement rules. The device can measure the actual temperature and output alarms when temperature exceeds the alarm threshold value.
  • Page 16 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual • Display Temperature Info. on Capture: Select Yes to display temperature information on the capture. • Display Rule Info. on Capture: Select Yes to display rule information on the capture. Enable Rules to display the rules information on live view.
  • Page 17 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual • Emissivity: Set the emissivity of your target. The emissivity of each object is different. • Distance: The distance between the target and the device. • Pre-Alarm Threshold: When the temperature of target exceeds the pre-alarm threshold, and this status keeps NOT shorter than Filtering Time, it triggers the pre-alarm.
  • Page 18 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 9. Optional: Call the preset and check if the rules are efficient. 10. Enable the device scan function such as linear scan to monitor the scene. Set Thermography Rule Steps 1.

  • Page 19: Manual Thermography

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual difference threshold. The device alarms when the temperature difference meets the setting value. 5. Click Save. Click Live View, and select thermal channel to view the temperature and rules information on live view.

  • Page 20: Search History Temperature

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Measurement+Behavior analysis. Steps 1. Go to Configuration → Local and select Display Temperature Info. as Yes. 2. Go to Configuration → Temperature Measurement → Basic Settings. 3. Check Enable Temperature Measurement.

  • Page 21: Chapter 4 Fire Source Detection

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Chapter 4 Fire Source Detection The device will trigger and upload an alarm when it detects a fire source. Fire source detection is applied for fire-prevention purposes in scenic regions, forests, tunnels, and so on.

  • Page 22: Set The Presets

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual • The installation should be at the highest position within the detection area. The lens should not be covered during movement to detect the maximum area. • It is better to choose an installation location with convenient traffic, well-equipped power, and Internet facilities.

  • Page 23: Set Fire Detection Parameters

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Table 4-1 Table of Optical Channel Zoom Ratio and Patrol Speed 16.7–1000 12.5–775 15.6–500 6.7–330 10-320 5.6-208 (Focus Distance) (Focus Distance) (Focus Distance) (Focus Distance) (Focus Distance) (Focus Distance) The left column is optical ratio, the right columns are speed level...
  • Page 24 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual source when performing auto scan, patrol, pattern, scheduled task, and park action. • Manual: The device stays still where it detects a fire source, until you manually move the camera.

  • Page 25: Chapter 5 Behavior Analysis

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Chapter 5 Behavior Analysis The behavior analysis function detects whether any target breaks the VCA rules. The optical camera will track the target or the device will alarm when the VCA rule is triggered.

  • Page 26: Configure The Behavior Analysis

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual • Display VCA Info. on Stream: Select to display target info and rule on stream, the information will be added to the video stream, and the overlay will be displayed if you get live view or play back with the VS Player.
  • Page 27 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual • Tracking Duration: Set the duration of tracking. If the value is selected as 0, the tracking duration will not be limited. • Limited Tracking: You can set the limited position for the tracking.
  • Page 28 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual • Background Interference Suppression: Eliminate the environment interference to reduce false alarms. For example, wind blown grass. 5. Draw the rules. • When the rule type is selected as Line Crossing, click to draw a line in the live view.

  • Page 29: Advanced Configuration

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 2. Click the up and down arrow to adjust the patrol sequence. 3. Click Save. 5.3. Advanced Configuration Go to Configuration → VCA → Advanced Configuration and configure the parameters.

  • Page 30: Chapter 6 Event And Alarm

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Chapter 6 Event and Alarm This part introduces configuring events. The device takes certain response to a triggered alarm. 6.1. Set Motion Detection This helps to detect moving objects in the detection region and trigger the linkage actions.
  • Page 31 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Figure 5, Set Rules • Stop Drawing: Stop drawing one area. • Clear All: Clear all the areas. 4. Optional: You can set the parameters of multiple areas by repeating the above steps.

  • Page 32: Set Video Tampering Alarm

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Figure 6, Set Rules • Stop Drawing: Finish drawing one area. • Clear All: Delete all the areas. 4. Optional: Repeat the above steps to set multiple areas. 6.2. Set Video Tampering Alarm When the configured area is covered and cannot be monitored normally, the alarm is triggered and the device takes certain alarm response actions.

  • Page 33: Set Alarm Input

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Figure 7, Set Video Tampering Area 6. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 7. Click Save. 6.3. Set Alarm Input Alarm signal from an external device triggers the corresponding actions of the current device.

  • Page 34: Set Exception Alarm

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 6.4. Set Exception Alarm Exceptions such as network disconnection can trigger the device to take corresponding action. Steps 1. Go to Configuration → Event → Basic Event → Exception. 2. Select Exception Type.
  • Page 35 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Steps 1. Go to Configuration → Event → Smart Event → Audio Exception Detection. 2. Select one or several audio exception detection types. • Audio Loss Detection: Detects sudden loss of audio track.

  • Page 36: Chapter 7 Arming Schedule And Alarm Linkage

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Chapter 7 Arming Schedule and Alarm Linkage Arming schedule is a customized time period during which the device performs certain tasks. Alarm linkage is the response to certain detected incidents or targets during the scheduled times.
  • Page 37 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Manual Alarm You can trigger an alarm output manually. Steps 1. Set the manual alarm parameters. • Alarm Output No.: Select the alarm output no. according to the alarm interface connected to the external alarm device.
  • Page 38 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Send Email Check Send Email, and the device sends an e-mail to the designated addresses with alarm information when an alarm event is detected. For e-mail settings, refer to Set Email.
  • Page 39 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Trigger Recording Check Trigger Recording, and the device records the video about the detected alarm event. NOTE: For devices with more than one camera channel, you can set one or more channels to take recordings if needed.

  • Page 40: Chapter 8 Ptz

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Chapter 8 PTZ PTZ is an abbreviation for pan, tilt, and zoom. It means the camera’s movement options. 8.1. PTZ Control In the live view interface, use the PTZ control buttons to control the device panning, tilting, and zooming.

  • Page 41: Set Preset

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Iris When the image is too dark, click the button to enlarge the iri When the image is too bright, click the button to stop down the iris. 8.2. Set Preset A preset is a predefined image position.

  • Page 42: Set Patrol Scan

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Special Presets You can call the following presets with special demands to enable corresponding functions. Preset No. Function Preset No. Function Back to origin Set manual limits Call patrol 1...

  • Page 43: Set Pattern Scan

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 6. Operate patrols. • Call the patrol • : Stop patroling • : Delete the patrol • Set the patrol You can delete all patrols in Configuration → PTZ → Clear Config. Click Clear All Patrols, and NOTE: click Save.

  • Page 44: Set Linear Scan

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual • Click to reset pattern scan path • Click to delete the selected pattern scan To delete the pattern scans, go to Configuration → PTZ → Clear Config, check Clear All NOTE: Patterns, and click Save.

  • Page 45: Set Initial Position

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 5. Click Save. 6. Check Enable Limit. If you need to cancel all the set patrol paths, go to Configuration → PTZ → Clear Config, select NOTE: Clear All PTZ Limited, and click Save.

  • Page 46: Set Park Action

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 8.9. Set Park Action You can set the device to perform an action (for example, a preset or patrol) or return to a position after a period of inactivity (park time).
  • Page 47 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Steps 1. Go to the setting page: Configuration → PTZ → Position Settings. 2. Select a PT Mode. • Manual : Use a direction indicating device to determine North at the device location, and set North Set Manual Compass for the device.

  • Page 48: Set Power Off Memory

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Set Auto Compass For a device that has a built-in e-compass, the compass can automatically tell the north direction for the device. Before You Start Electromagnetic interference may affact the accuracy of the e-compass. Use a manual compass if electromagnetic interference occurs in the device installation environment.

  • Page 49: Chapter 9 Live View

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Chapter 9 Live View This section introduces the live view parameters, function icons, and transmission parameters settings. 9.1. Live View Parameters NOTE: For multichannel devices, select the desired channel first before live view settings.
  • Page 50 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Steps 1. Go to wiper setting page: Configuration → PTZ → Wiper. 2. Select a wiper mode. • One Time: The wiper wipes one time when you click on the live view page.
  • Page 51 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Quick Set Live View This offers a quick setup of PTZ, display settings, OSD, video/audio, and VCA resource settings on the live view page. Steps 1. Click to show quick setup page.

  • Page 52: Set Transmission Parameters

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Conduct 3D Positioning 3D positioning relocates the selected area to the image center. Steps 1. Click to enable the function. 2. Select a target area in live image. • Left click on a point on live image: the point is relocated to the center of the live image. With no zooming in or out effect.
  • Page 53 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual ­ Shortest Delay: The device takes the real-time video image as priority over video fluency. ­ Balanced: The device ensures both the real-time video image and fluency. ­ Fluent: The device takes the video fluency as priority over real-time. In poor network environments, the device cannot ensure video fluency even if fluency is enabled.

  • Page 54: Chapter 10 Video And Audio

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Chapter 10 Video and Audio This part introduces the configuration of video and audio related parameters. 10.1. Video Settings This part introduces the settings of video parameters, such as, stream type, video encoding, and resolution.
  • Page 55 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Video Quality When Bitrate Type is set as Variable, video quality is configurable. Select a video quality according to actual needs. Note that higher video quality requires higher bandwidth. Frame Rate Frame rate describes the frequency at which the video stream is updated, measured in frames per second (fps).
  • Page 56 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Profile: This function means that under the same bitrate, the more complex the profile, the higher the • image quality, and the network bandwidth requirement is also higher. I-Frame Interval: The number of frames between two I-frames.
  • Page 57 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Environmental Noise Filter Set it as OFF or ON. When the function is enabled, the noise in the environment can be filtered to some extent. Two-way Audio This realizes the two-way audio between the monitoring center and the target in the monitoring screen.

  • Page 58: Display Settings

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 6. Input the Region Name and ROI Level. 7. Click Save. NOTE: The higher the ROI level, the clearer the image of the detected region. 8. Optional: Select other region no. and repeat the above steps if you need to draw multiple fixed regions.
  • Page 59 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Exposure Settings Exposure is controlled by the combination of iris, shutter, and photo sensibility. You can adjust the image effect by setting exposure parameters. In manual mode, set Exposure Time, Gain, and Slow Shutter.
  • Page 60 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual • Triggered by Alarm Input: Two trigger modes are available: Day and Night. For example, if the trigger mode is Night, the image turns black and white when the device receives an alarm input signal.
  • Page 61 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Defog You can enable the defog function when the environment is foggy and the image is misty. It enhances the subtle details so that the image appears clearer. Set Laser Parameters Steps 1.
  • Page 62 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 4. Set the temperature value and color of High Temperature, Interval Temperature, or Low Temperature targets. Figure 10-1 Set the Temperature and Color of Target • Above (be colored): When a high temperature target needs to be in color, you can set the high temperature color.

  • Page 63: Osd

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Digital Detail Enhancement adjusts the image details. OFF and Normal modes are selectable. • OFF: Disable this function. • Normal: Set the DDE level to control the details of the image. The higher the level, the more details show, but the greater the noise.

  • Page 64: Overlay Picture

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 10.4. Overlay Picture Overlay a customized picture on live view. Before You Start The picture to overlay has to be in 24-bit BMP format, and the maximum picture size is 128 × 128 pixels.

  • Page 65: Set Picture-In-Picture

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 10.6. Set Picture-in-Picture You can overlay the images of two channels and view the image of two channels at the same time. Steps 1. Select a channel number. 2. Select the picture-in-picture mode.

  • Page 66: Chapter 11 Video Recording And Picture Capture

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Chapter 11 Video Recording and Picture Capture This section introduces capturing video clips and snapshots, playback, and downloading captured files. 11.1. Storage Settings This part introduces the configuration of several common storage paths.
  • Page 67 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 3. Click Test to check whether the network disk is available. 4. Click Save. Set FTP You can configure the FTP server to save images that are captured by events or a timed snapshot task.

  • Page 68: Video Recording

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual • User Name and Password: The user name and password of the cloud storage server • Picture Storage Pool ID: The ID of the picture storage region in the cloud storage server. Make sure the storage pool ID and the storage region ID are the same.
  • Page 69 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual • Overwrite: Enable Overwrite to overwrite the video records when the storage space is full. Otherwise the camera cannot record new videos. • Pre-record: The time period you set to record before the scheduled time.

  • Page 70: Capture Configuration

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Go to Configuration → Local , click Save downloaded files to to change the saving path of NOTE: downloaded video files. 11.3. Capture Configuration The device can capture the pictures manually or automatically and save them in the configured saving path.
  • Page 71 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Steps 1. Click Picture. 2. Select channel no. 3. Set search condition, and click Search. Matching pictures show in the file list. 4. Select the pictures, then click Download to download them.

  • Page 72: Chapter 12 Network Settings

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Chapter 12 Network Settings 12.1. TCP/IP TCP/IP settings must be properly configured before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be configured simultaneously without conflicting with each other.

  • Page 73: Port Mapping

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Go to Configuration → Network → Basic Settings → Port for port settings. • HTTP Port: The port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.168.1.64:81 in the browser for login.

  • Page 74: Multicast

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Set Auto Port Mapping Steps 1. Check Enable UPnP , and choose a friendly name for the camera, or use the default name. ™ 2. Set the port mapping mode to Auto.

  • Page 75: Access To Device Via Domain Name

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Steps 1. Go to the settings page: Configuration → Network → Advanced Settings → SNMP. 2. Check Enable SNMPv1, Enable SNMP v2c, or Enable SNMPv3. NOTE: The SNMP version you select should be the same as that of the SNMP software.

  • Page 76: Accessing Via Mobile Client

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Steps 1. Go to Configuration → Network → Basic Settings → PPPoE. 2. Check Enable PPPoE. 3. Set the PPPoE parameters. • Dynamic IP: After successful dial-up, the dynamic IP address of the WAN is displayed.
  • Page 77 • Visit https://appstore.hikvision.com to download the application according to your mobile phone system. Visit the official site of our company. Then go to Support → Tools → Hikvision App Store. • • Scan the QR code below to download the application.
  • Page 78 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual NOTE: If errors such as “Unknown app” occur during the installation, solve the problem in two ways. Visit https://appstore.hikvision.com/static/help/index.html and refer to the troubleshooting. Visit https://appstore.hikvision.com/, and click Installation Help at the upper right corner of the interface to refer to troubleshooting.

  • Page 79: Set Isup

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 12.9. Set ISUP When the device is registered on an ISUP platform (formerly called Ehome), you can visit and manage the device, transmit data, and forward alarm information over a public network.

  • Page 80: Chapter 13 System And Security

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Chapter 13 System and Security This section introduces system maintenance, system settings, and security management, and explains how to configure relevant parameters. 13.1. View Device Information You can view device information such as Device No., Model, Serial No., and Firmware Version.

  • Page 81: Export Diagnose Information

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 13.4. Export Diagnose Information Diagnose information includes running log, system information, and hardware information. Go to Configuration → System → Maintenance → Upgrade & Maintenance, and click Diagnose Information to export diagnose information of the device.

  • Page 82: Set Electric Current Limit

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 13.8. Set Electric Current Limit This function can control the power supply current of the device. Go to Configuration → System → Maintenance → System Service, and select Electric Current Limit type. You can limit the device current to 75 percent of full current or half the full current for power saving control.

  • Page 83: Set Rs-232

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 5. Click Test to test server connection. 6. Click Save. Set DST If the region where the device is located adopts Daylight Saving Time (DST), you can set this function.

  • Page 84: Set Same Unit

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 13.13. Set Same Unit Set the same temperature unit and distance unit. When you enable this function, the unit cannot be configured separately in other setting pages. Steps 1. Go to Configuration → System → System Settings → Unit Settings.
  • Page 85 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Security Audit Log The security audit logs refer to the security operation logs. You can search and analyze the security log files of the device so as to find out the illegal intrusion and troubleshoot the security events.
  • Page 86 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Set SSH SSH is a protocol to ensure security of remote login. This setting is reserved for professional maintenance personnel only. Steps 1. Go to Configuration → System → Security → Security Service.
  • Page 87 DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual Steps 1. Select Create certificate request first and continue the installation. 2. Click Create. 3. Follow the prompt to input Country, Hostname/IP, Validity and other parameters. 4. Click Download to download the certificate request and submit it to the trusted authority for signature.

  • Page 88: User And Account

    DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual 13.15. User and Account Set User Account and Permission The administrator can add, modify, or delete other accounts, and grant different permission to different user levels. NOTE: To increase the security of using the device on the network, change your account password regularly.

  • Page 89: Chapter 14 Appendix

    0.96 14.2. Device Command Scan the following QR code to get the device’s common serial port commands. Note that the command list contains the commonly used serial port commands for Hikvision thermal cameras. 14.3. Device Communication Matrix Scan the following QR code to get the device’s communication matrix.

Table of Contents