Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
5.
Set the duration from 1 to 100.
6.
Enable rules: Check the Enable checkbox of each rule in the rule list to enable the rule.
7.
Click
6.4.3 Region Entrance
Purpose:
This function can be used for detecting people, vehicles and objects entering the
pre-defined region. The alarm will be triggered if the rule is broken.
Steps:
1.
Create new rule: Click on the button
2.
Select rule type: Click the dropdown menu and select Region Entrance as the rule
type.
3.
Configure the rule area:
Click
on the tool bar of the live view panel. Click the mouse on the live view panel.
Right click the mouse to finish drawing.
4.
Configure the filtering size: for details, see step 3 in section 6.4.1 Line Crossing.
5.
Enable rules: Check the Enable checkbox of each rule in the rule list to enable the rule.
6.
Click
© Hikvision
Figure 6-11 Draw Area
to save the settings.
to add a new rule.
to save the settings.
74
Advertisement
Table of Contents
