HIKVISION DS-2TD8166-180ZE2F-V2 User Manual page 131

User Manual of Thermal Network Positioning system
 Importing/Exporting Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click
start importing configuration file.
You need to reboot the positioning system after importing configuration file.
 Upgrading the System
Steps:
1. Enter the Maintenance interface:
Configuration >System > Maintenance > Upgrade & Maintenance
2. Select Firmware or Firmware Directory.
 Firmware: when you select Firmware, you need to find the firmware in your
computer to upgrade the device.
 Firmware Directory: You need to find the directory where the firmware locates.
The device can find the firmware in the directory automatically.
3. Click
remote upgrade.
The upgrading process will take 1 to 10 minutes. Please don't disconnect power of the
positioning system during the process. The positioning system reboots automatically
after upgrading.
Log Searching
Purpose:
© Hikvision
Figure 7-65 Restore Default Settings
to select the local configuration file and then click
Figure 7-66 Import Configuration File
to select the local upgrade file and then click
Figure 7-67 Remote Upgrade
123
to
to start