Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
You can also click
searched devices will be added to the list.
You can click
can click
the right side, or click
Modify network parameters
Steps:
1. Select the device to be modified in the device list and the network parameters of the
device will be displayed in the Modify Network Parameters panel on the right side.
2. Edit the modifiable network parameters, e.g. IP address and port number.
3. Enter the password of the admin account of the device in the Password field and click
to save the changes.
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including upper case letters, lower case letters, numbers
and special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
© Hikvision
to refresh the online device list manually. The newly
or
on each column heading to order the information; you
to expand the device table and hide the network parameter panel on
to show the network parameter panel.
Figure A.1.2 Modify Network Parameters
134
Advertisement
Table of Contents
