Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
Auto Scan Speed: The scan speed can be set from level 1 to 40.
ax. Tilt-angle: Set the tilt-angle of the positioning system from the dropdown list.
M
Zooming Speed: The speed of zooming is adjustable.
PTZ OSD: Set the on-screen display duration of the PTZ status.
Zoom Status: Set the OSD duration of zooming status as 2 seconds, 5 seconds, 10
seconds, Always Close or Always Open.
PT Status: Set the azimuth angle display duration while panning and tilting as 2
seconds, 5 seconds, 10 seconds, Always Close or Always Open.
Preset Status: Set the preset name display duration while calling the preset as 2
seconds, 5 seconds, 10 seconds, Always Close or Always Open.
Power-off Memory: The positioning system can resume its previous PTZ status or
actions after it restarted from a power-off. You can set the time point of which the
positioning system resumes its PTZ status. You can set it to resume the status of 30
seconds, 60 seconds, 300 seconds or 600 seconds before power-off.
3. Click
7.3.2 Configuring PTZ Limits
Purpose:
The positioning system can be programmed to move within the configurable PTZ limits
(left/right, up/down).
Steps:
1.
Enter the Limit configuration interface:
Configuration > PTZ > Limit
© Hikvision
to save the settings.
96
Advertisement
Table of Contents
