Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
5.4.2 Temperature Measurement and Alarm
Purpose:
This function is used for measuring the temperature of detected spot and the device
compares temperature of selected regions and alarms.
Steps:
1. Enter Configuration > Temperature Measurement > Advanced Settings.
2. Select the temperature measurement and alarm configuration as Normal or Expert.
Normal Mode:
Figure 5-26 Temperature Measurement Configuration
Emissivity: Set the emissivity of your target. Note: The emissivity of each object
is different.
Distance (m): The straight-line distance between the target and the device.
Pre-Alarm Threshold: Set the pre-alarm temperature and the device sends
pre-alarm when its rule temperature exceeds pre-alarm temperature.
Alarm Threshold: Set the alarm temperature and the device sends alarm when
its rule temperature exceeds alarm temperature.
© Hikvision
60
Advertisement
Table of Contents
