Table of Contents
Advertisement
User Manual of Thermal Bi-spectrum Network Positioning System
Chapter 4 Basic Operations
In this and the following chapters, operation of the positioning system by the web browser
will be taken as an example.
4.1 Configuring Local Parameters
The local configuration refers to the parameters of the live view and other operations
using the web browser.
Steps:
1.
Enter the Local Configuration interface:
Configuration > Local
2.
Configure the following settings:
Live View Parameters: Set the protocol type, play performance, rules and image
format.
Protocol Type: TCP, UDP, MULTICAST and HTTP are selectable.
TCP: Ensures complete delivery of streaming data and better video quality, yet the
real-time transmission will be affected.
UDP: Provides real-time audio and video streams.
MULTICAST: It's recommended to select the protocol type to MULTICAST when
using the Multicast function.
HTTP: Allows the same quality as of TCP without setting specific ports for
streaming under some network environments.
Play Performance: Set the play performance to Shortest Delay, or Auto.
© Hikvision
Figure 4-1 Local Configuration Interface
17
Advertisement
Table of Contents
