Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
7. Click
7.4.3 Configuring Text Overlay Settings
Purpose:
You can customize the text overlay.
Steps:
1. Enter the Text Overlay settings interface:
Configuration > Image > OSD Settings
2. Check the checkbox in front of textbox to enable the on-screen display.
3. Input the characters in the textbox.
4. Use the mouse to click and drag the red text frame
adjust the text overlay position.
5. Click
There are up to 4 text overlays configurable. When the video resolution is 1080p, only
one text overlay is supported. When PTZ direction, preset OSDs are displayed, the text
overlay is disabled.
© Hikvision
Figure 7-53 Adjust OSD Location
to activate above settings.
to save the settings.
Figure 7-54 Text Overlay Settings
Text
in the live view window to
115
Advertisement
Table of Contents
