HIKVISION DS-2TD8166-180ZE2F-V2 User Manual page 67

User Manual of Thermal Network Positioning system
2. Check the checkboxes of the interface to set the temperature measurement
configurations.
 Enable Temperature Measurement: Check the checkbox to enable temperature
measurement function.
 Enable Color-Temperature: Check the checkbox to display Temperature-Color
Ruler in live view.
 Display Temperature Info. on Stream: Check the checkbox to display temperature
information in live view.
 Add Original Data on Capture: Check the checkbox to add original data on capture.
 Add Original Data on Stream: Check the checkbox to add original data on stream.
 Data Refresh Interval: Select the data refresh interval from 1s to 5s.
 Unit: Display temperature with Degree Celsius (° C)/Degree Fahrenheit (° F)/Degree
Kelvin (K).
 Temperature Range: Set the temperature range.
 Emissivity: Set the emissivity of your target. Note: The emissivity of each object is
different.
 Distance (m): The straight-line distance between the target and the device.
3. Clcik Save to save the settings .
© Hikvision
Figure 5-25 Dynamic Fire Source Detection
59