Configuring Park Actions - HIKVISION AP530HT Quick Start Manual

3.2.2 Configuring Park Actions

Purpose:
For some certain model of the speed dome, it can be configured to start a predefined park action
(scan, preset, patrol and etc.) automatically after a period of inactivity (park time).
 Configuring Park Actions by DVR
Steps:
1. Click the button PTZ in the lower-right corner of the PTZ setting interface;
Menu>Camera>PTZ
2. Click the button to show the one-touch function of the PTZ control.
3. There are 3 one-touch park types selectable, click the corresponding button to activate the
park action.
Park (Quick Patrol): The dome starts patrol from the predefined preset 1 to preset 32 in order
after the park time. The undefined preset will be skipped.
Park (Patrol 1): The dome starts move according to the predefined patrol 1 path after the park
time.
Park (Preset 1): The dome moves to the predefined preset 1 location after the park time.
The park time can only be set through the speed dome configuration interface, by default
the value is 5s.
4. Click the button again to inactivate it.
 Configuring Park Actions by OSD Menu
Steps:
1. Call the preset 95 to enter the main menu and move the cursor to enter motion parameters
setting submenu:
MAIN MENU > DOME SETTINGS > MOTION SETTINGS
HD-TVI Speed Dome·Quick Start Guide
Figure 3-7 PTZ Panel - One-touch
29