Configuring Park Actions - HIKVISION DS-2DE1A400IW-DE3 User Manual

User Manual of Network PTZ Camera

Customize an Initial Position:
Steps:
1. Enter the Initial Position configuration interface:
Configuration > PTZ > Initial Position
2. Click the PTZ control buttons to find a position as the initial position of the speed dome; you
can also call a defined preset and set it as the initial position of the speed dome.
3. Click Set to save the position.
 Call/delete an Initial Position:
You can click to call the initial position. You can click
restore the factory default initial position.

5.4.4 Configuring Park Actions

Purpose:
This feature allows the camera to start a predefined park action (scan, preset, pattern and etc.)
automatically after a period of inactivity (park time).

Scheduled Tasks function is prior to Park Action function. When these two functions are set
at the same time, only the Scheduled Tasks function takes effect.

Park function varies depending on different camera models.
Steps:
1. Enter the Park Action settings interface:
© Hikvision
Figure 5-28 PTZ Configuration
to delete the initial position and
59