Configuring Ptz Limits - HIKVISION DS-2DE1A400IW-DE3 User Manual

User Manual of Network PTZ Camera
defined by a preset to another, without showing the middle areas between these two, to
ensure the surveillance efficiency. It can also reduce the use of bandwidth in a digital
network system.
Preset freezing function is invalid when you calling a pattern.

Preset Speed: You can set the speed of a defined preset from 1 to 8.

Manual Control Speed: The manual control speed can be set as Compatible, Pedestrian,
Non-motor Vehicle, Motor Vehicle or Auto.
 Compatible: The control speed is same as the Keyboard Control Speed.
 Pedestrian: Choose the Pedestrian when you monitor the pedestrians.
 Non-motor Vehicle: Choose the Non-motor Vehicle when you monitor the non-motor
vehicles.
 Motor Vehicle: Choose the Motor Vehicle when you monitor the motor vehicles.
 Auto: You are recommended to set it as Auto when the application scene of the speed
dome is complicated.

Keyboard Control Speed: Define the speed of PTZ control by a keyboard as Low, Medium
or High.

Auto Scan Speed: The scan speed can be set from level 1 to 40.

ax. Tilt-angle: Set the tilt-angle of the speed dome from the dropdown list.
M

Zooming Speed: The zoom speed is adjustable from level 1 to 3.

 PTZ OSD: Set the on-screen display duration of the PTZ status.

Zoom Status: Set the OSD duration of zooming status as 2 seconds, 5 seconds, 10
seconds, NC (Normally Closed), or NO (Normally Open).

PT Status: Set the azimuth angle display duration while panning and tilting as 2 seconds,
5 seconds, 10 seconds, NC (Normally Closed), or NO (Normally Open).

Preset Status: Set the preset name display duration while calling the preset as 2 seconds,
5 seconds, 10 seconds, NC (Normally Closed), or NO (Normally Open).
 Power-off Memory: The speed dome can resume its previous PTZ status or actions after it
restarted from a power-off. You can set the time point of which the dome resumes its PTZ
status. You can set it to resume the status of 30 seconds, 60 seconds, 300 seconds or 600
seconds before power-off.
3. Click

5.4.2 Configuring PTZ Limits

Purpose:
The speed dome can be programmed to move within the configurable PTZ limits (left/right,
up/down).
For some certain camera models, disable PTZ limit and then the pan angle reaches 330
© Hikvision
to save the settings.
57
°.