Configuring Ptz Limits - HIKVISION DS-2TD4136T-25 User Manual

User Manual of Thermal Network Speed dome
Auto Scan Speed: The scan speed can be set from level 1 to 40.

 ax. Tilt-angle: Set the tilt-angle of the speed dome from the dropdown list.
M
 Zooming Speed: The speed of zooming is adjustable.
PTZ OSD: Set the on-screen display duration of the PTZ status.

Zoom Status: Set the OSD duration of zooming status as 2 seconds, 5 seconds, 10

seconds, Always Close or Always Open.
PT Status: Set the azimuth angle display duration while panning and tilting as 2

seconds, 5 seconds, 10 seconds, Always Close or Always Open.
 Preset Status: Set the preset name display duration while calling the preset as 2
seconds, 5 seconds, 10 seconds, Always Close or Always Open.
Power-off Memory: The speed dome can resume its previous PTZ status or actions

after it restarted from a power-off. You can set the time point of which the speed
dome resumes its PTZ status. You can set it to resume the status of 30 seconds, 60
seconds, 300 seconds or 600 seconds before power-off.
3. Click

7.3.2 Configuring PTZ Limits

Purpose:
The speed dome can be programmed to move within the configurable PTZ limits (left/right,
up/down).
Steps:
1. Enter the Limit configuration interface:
Configuration > PTZ > Limit
© Hikvision
to save the settings.
96