Network Security Parameters Defined - Intermec EasyLan AW02 User Manual

Chapter 2 — Configuring EasyLAN Wireless

Network Security Parameters Defined

Network Security Parameters Defined
Parameter Definition
Encryption Mode Select the encryption your network is using.
WPA2 uses CCMP encryption.
WPA2-WPA uses CCMP for pair-wise encryption
but allows TKIP for group encryption.
Key Selection Specify which WEP key is active.
WEP Key Fill in at least one of these fields if you set
Encryption Mode to WEP 64 bit encryption or
to WEP 128 bit encryption.
These values are ignored unless the encryption
mode is 64 or 128 bit WEP.
Authentication Select the type of security that you are
Type implementing in your wireless network. Intermec
recommends that you do not use Shared Key.
User ID Enter the logon user ID that EasyLAN Wireless
uses to authenticate to the 802.1x-enabled
network. The user ID must be in the
authentication server database.
Password Enter the logon password that EasyLAN Wireless
uses to authenticate to the 802.1x-enabled
network. The password must be in the
authentication server database.
Certificate Enter the name of the certificate on the primary
Common Name 1 authentication server. If the common name is
blank, all certificates are accepted.
Certificate Enter the name of the certificate on the secondary
Common Name 2 authentication server.
42
The default values in the "Network Security Parameters Defined" table are
compatible with the default, out-of-the-box settings for a MobileLAN
access WA2X access point with the embedded authentication server
enabled for TTLS. If you plan to use another access point, you may need
to adjust the parameters.
Values
Disabled,
WEP 64-bit encryption,
WEP 128-bit encryption,
TKIP,
WPA2,
WPA2-WPA,
Dynamic WEP
1,
2,
3,
4
Hexadecimal value, up to
10 digits for 64-bit WEP
or up to 26 digits for 128-
bit WEP
Open System,
Shared Key,
TTLS,
LEAP,
PEAP,
PSK
String of alphanumeric
ASCII characters
String of alphanumeric
ASCII characters
String of alphanumeric
ASCII characters
String of alphanumeric
ASCII characters
EasyLAN Wireless User's Manual
Default
Disabled
1
Blank
Open System
anonymous
Blank
Blank
Blank