Table of Contents
Advertisement
Appendix A — Console Commands
94
TCP/IP Console Commands (continued)
Command
set ip arp status
set ip ba status
set ip chksum status
set ip bo n
set ip status
set ip fti status
set ip ftp status
set ip http status
set ip ke nn
set ip lpd status
set ip me method
set ip ping n.n.n.n
Description
Enables or disables the ability of using ARP to
configure the EasyLAN Wireless IP address. Where
status is
for enabled or
en
dis
default is enabled.
Enables or disables EasyLAN Wireless to print the
banner page in an LPD control file. Where status is
for enabled or
for disabled. The default is
en
dis
disabled.
Enables or disables EasyLAN Wireless to compute
the TCP checksum on received packages. Where
status is
for enabled or
en
dis
default is enabled.
Sets the number of tries for each enabled IP boot
method, if the boot method is not set to static.
Where n is the number of tries. The default is 3.
Enables or disables IP processing. Where status is
for enabled or
for disabled. The default is
dis
enabled.
Enables or disables fast IP timeout. Where status is
for enabled (timeout is measured in seconds) or
en
for disabled (timeout is measured in minutes).
dis
The default is disabled.
Enables or disables the FTP protocol. Where status is
for enabled or
for disabled. The default is
en
dis
enabled.
Enables or disables the HTTP protocol. Where
status is
for enabled or
en
dis
default is enabled.
Sets how often (in minutes) EasyLAN Wireless sends
an IP ping packet to the router to keep the router
aware of EasyLAN Wireless. This is called the
keepalive timer. The default is 5 minutes.
Enables or disables the LPD protocol. Where status
is
for enabled or
for disabled. The default is
en
dis
enabled.
Sets the boot method for getting the IP address for
the EasyLAN Wireless. Where method is
,
,
, or
DHCP
BOOTP
RARP
STATIC
.
AUTO
Tests the connection to IP host with IP address
n.n.n.n, where n is a number from 0 to 255.
EasyLAN Wireless User's Manual
for disabled. The
for disabled. The
en
for disabled. The
,
AUTO
. The default is
Advertisement
Table of Contents
Troubleshooting
