Intermec EasyLan AW02 User Manual page 16

Chapter 1 — Installing EasyLAN Wireless
4
To use 802.1x security and PEAP, you need:
• an authentication server. You can use a PC with the Funk Odyssey
RADIUS server software v1.1 or later. Or, you can use a compatible
authentication server.
• an authenticator that supports PEAP, such as an Intermec MobileLAN
access point with an 802.11b/g radio. The authenticator knows the IP
address and secret key of the authentication server and translates PEAP
frames to Remote Authentication Dial-In User Service (RADIUS)
frames and vice versa.
• a printer with EasyLAN Wireless Model AW02 running firmware
version 4.32 or later.
To use WPA-Personal, you need:
• an authenticator that supports WPA-Personal, such as an Intermec
MobileLAN access point. For help, see the access point system manual.
• a printer with EasyLAN Wireless Model AW02 running firmware
version 4.30 or later.
To use WPA-Enterprise, you need:
• an authentication server. You can use a PC with the Funk Odyssey
RADIUS server software v1.1 or later. You can use an Intermec
MobileLAN access point with software v1.80 or later; for help, see the
access point system manual. Or, you can use a compatible
authentication server.
• an authenticator that supports both WPA and 802.1x, such as an
Intermec MobileLAN access point with an 802.11b/g radio and
software v1.80 or later. The authenticator knows the IP address and
secret key of the authentication server and translates EAP frames to
Remote Authentication Dial-In User Service (RADIUS) frames and vice
versa.
• a printer with EasyLAN Wireless Model AW02 running firmware
version 4.30 or later.
To use WPA2-Personal, you need:
• an access point that supports WPA2, such as a Cisco 1230, 1231, or
1300 access point. For help, see the access point system manual.
• a printer with EasyLAN Wireless Model AW02 running firmware
version 4.32 or later.
EasyLAN Wireless User's Manual