Intermec EasyLan AW02 User Manual page 53

EasyLAN Wireless User's Manual
• To implement WPA2-Enterprise, you may set these parameters and
proceed to Step 5 on page 41:
Parameter
Encryption Mode
Authentication Type
User ID
Password
Certificate Command Name 1
Certificate Command Name 2
Certificate Root Key
Certificate Root Key Exponent
Authentication Protocol
WPA Auto Associate
WPA Group Key
Load Certificate
*
WPA2 uses CCMP encryption.
** WPA2-WPA uses CCMP for pair-wise encryption but allows TKIP for
group encryption.
5 If the page contains the Network Card Update Password field, enter
the current update password. The default is
6 Click Submit. The message, "Data updated successfully," appears. The
changes will take effect the next time you reset EasyLAN Wireless.
7 (Optional) To make the changes effective immediately, click the link,
Configuration has been modified. The unit must be reset for new
values to take effect. The Reset Server page appears. For help, see the
instructions for resetting the EasyLAN Wireless print server, starting
with Step 4 on page 67.
8 You can click any of the commands along the left side of the page. To
exit, click Logout and close your web browser. The next time you log
in, you will need to enter the new password.
Chapter 2 — Configuring EasyLAN Wireless
Setting
WPA2*,
WPA2-WPA**
TTLS
Set as appropriate
Set as appropriate
Set as appropriate
Set as appropriate
Set as appropriate
Set as appropriate
Set as appropriate
Set as appropriate
Set as appropriate
Click if necessary
.
intermec
41