Configuring Passwords; Configuring The Access Password - Intermec EasyLan AW02 User Manual

Chapter 2 — Configuring EasyLAN Wireless

Configuring Passwords

Configuring the Access Password

26
4 In the Network Card Access Password field, enter the current access
password. The default password is
Submit. The Printer Status page returns, and more commands are listed
along the left side of the page.
Note: You remain logged in until you click Logout or until the
5-minute inactivity timer expires. If the inactivity timer has expired
when you click a command that requires you to be logged in, the
Network Card Access Password page appears and you need to log in and
choose the command again.
5 You are now ready to configure EasyLAN Wireless.
You can protect EasyLAN Wireless by configuring the access password and
the update password.
The access password protects access to EasyLAN Wireless. This is the
password you enter when you click Login to log in to the web browser
interface, and it is also the password you enter when you start a console
session. By default, the access password is enabled and set to
lowercase.
There are two ways to configure the access password:
• You can use the Configure Network Card Access Password command in
the web browser interface, as described in the following procedure.
in lowercase. Click
intermec
EasyLAN Wireless User's Manual
in
intermec