Configuring Network Security With The Web Browser Interface - Intermec EasyLan AW02 User Manual

Chapter 2 — Configuring EasyLAN Wireless

Configuring Network Security with the Web Browser Interface

38
1 Log in to the EasyLAN Wireless web page. For help, see "Logging In to
the EasyLAN Wireless Web Browser Interface" on page 25.
2 Click Wireless. The Configure Wireless page appears.
3 Scroll down and click Configure Network Security. The Configure
Network Security page appears.
4 Configure the security parameters. For help, see "Network Security
Parameters Defined" on page 42.
Follow these security guidelines:
• To implement no security solution, set Encryption Mode to
Disabled and proceed to Step 5 on page 41.
Note: Intermec recommends that you implement a security solution
to protect your data and network.
• To implement Static WEP encryption, you may set these parameters
and proceed to Step 5 on page 41:
Parameter
Encryption Mode
Key Selection
WEP Key
Authentication Type
Setting
WEP 64 bit encryption,
WEP 128 bit encryption
Set as appropriate
Set as appropriate
Open System,
Shared Key
EasyLAN Wireless User's Manual