Netware Parameters Defined; Configuring Additional Queues - Intermec EasyLan AW02 User Manual

NetWare Parameters Defined

Parameter Definition
Netware Enable or disable communications over the
NetWare network.
Enabled Services Displays the bindery servers all Netware enabled
services will poll.
Active Servers and Displays the file servers and queues currently
Queues configured. Click Configure Bindery File
Servers to change the file servers displayed.
Frame Type Select the frame type.
Netware Password Enter the password EasyLAN Wireless uses to
communicate with the file server in the Enter
new password field and Confirm new
password field.
To disable the password, enter a single space.

Configuring Additional Queues

EasyLAN Wireless User's Manual
If you want to configure additional queues, you must use the Novell
NWAdmin utility (this program is usually found in the Public directory
on the NetWare file server).
To configure additional queues and ports
1 Start the NWAdmin utility and make sure you are in the right context.
(If not, select Tools > NDS Browser, and then browse for the desired
context.)
2 Select the container where you want the print queue to reside.
3 Select Tools > Print Services Quick Setup.
4 Browse for the NetWare Print Server by clicking the button next to the
Print Server Name window.
5 Enter the name of the NDS Printer for the desired port in the Name
box (for example, INTERMEC04ECBA_P1).
6 Leave the Type box at the default Parallel setting.
7 Select the desired banner type.
8 Enter any desired name for the print queue. If necessary, browse for the
volume.
9 Click Create to create the print queue. You are now ready to use the
queue from a NetWare workstation.
Chapter 2 — Configuring EasyLAN Wireless
Values Default
Enable, Enable
Disable
Server names PR1_1
None
0) AUTO, 0) AUTO
1) 802.3,
2) ETHERNET II,
3)802.2,
4) SNAP,
Any ASCII Blank (both)
characters
55