Chapter 1 — Installing EasyLAN Wireless
Configuring Network Communications and Security
12
This section explains how to initially configure your EasyLAN Wireless to
communicate with your network using the EasyLAN Network Setup
configuration wizard.
Note: For help configuring EasyLAN Wireless using a UNIX workstation,
see "Setting Up To Configure EasyLAN Wireless" on page 24.
To set network communications and security
1 Install EasyLAN Network Setup version 2.1 (or later) on your PC from
the PrinterCompanion CD that came with your printer.
2 On your PC, choose Start > Programs > Intermec EasyLAN Network
Setup. The Introduction screen appears.
3 EasyLAN Network Setup is easy to use. Follow these guidelines:
• At each screen, fill in the fields and click Next to continue.
• Click Help at any time to view the EasyLAN Network Setup help.
• If you are prompted for a password, enter the current update
password and click Next. The default is
more details, see "Configuring Passwords" on page 26.
• When you reach the Communications settings screen, you must set
the serial communications parameters exactly as shown in this table.
Parameter
Required Value
Baud rate
115200
Data bits
8
Stop bits
1
Parity
None
in lowercase. For
intermec
EasyLAN Wireless User's Manual