Table of Contents
Advertisement
Appendix A — Console Commands
DLC Console Commands
SMTP Console Commands
POP3 Console Commands
102
These commands let you configure and display DLC parameters.
DLC Console Commands
Command
set dlc status
set dlc tim nn
set servi servicename
dlc status
sh dlc
These commands let you configure and display SMTP parameters.
SMTP Console Commands
Command
set smtp ad n.n.n.n
set smtp status
sh smtp
These commands let you configure and display POP3 parameters.
POP3 Console Commands
Command
set pop3 ad n.n.n.n
set pop3 status
set pop3 po nn
set pop3 na name
Description
Enables or disables the DLC protocol. Where status
is
for enabled or
for disabled. The default is
en
dis
enabled.
Sets the DLC timeout (in seconds). Where nn is the
number of seconds. The default is 0.
Enables or disables DLC jobs on the specified
service. Where servicename is the service you are
modifying and status is
for enabled or
en
disabled. The default is enabled on service PR1_P1
and disabled on all others.
Shows the DLC parameters.
Description
Sets the SMTP server IP address. Where n is a
number from 0 to 255. The default is 0.0.0.0.
Enables or disables SMTP. Where status is
enabled or
for disabled. The default is enabled.
dis
Shows the SMTP parameters.
Description
Sets the POP3 server IP address. Where n is a
number from 0 to 255. The default is 0.0.0.0.
Enables or disables the POP3 protocol. Where status
is
for enabled or
for disabled. The default is
en
dis
enabled.
Sets the polling frequency (in seconds). The default
is 30 seconds.
Sets the name of the POP3 mailbox. The default is
NULL.
EasyLAN Wireless User's Manual
for
dis
for
en
Advertisement
Table of Contents
Troubleshooting
