Table of Contents
Advertisement
Chapter 2 — Configuring EasyLAN Wireless
NetBIOS/NetBEUI Parameters Defined
Parameter
Definition
NetBEUI
Enable or disable communication over the LLC
protocol.
NetBIOS IP
Enable or disable communication over the Internet
protocol.
Enabled Services
Configure the services on the port you are using. For
help, see "Configuring the Port Services" on page 49.
Computer Name
Displays the first 15 characters of the EasyLAN
Wireless node name.
Domain Name
Enter the name of the domain that contains the PCs
that will print to this printer.
WINS Server
Select the server method:
Method
•
Set to Auto to use a DHCP server to set the
primary and secondary WINS server IP addresses.
To use DHCP, you must set the boot method in
the Configure TCP/IP page to either Auto or
DHCP.
•
Set to Static to use the values you enter in the
primary and secondary WINS Server IP address
fields.
To disable WINS registration, set to Static and set
the primary and secondary WINS server IP addresses
to 0.0.0.0.
Primary WINS
Enter the IP address for the primary WINS server.
Server IP Address
Secondary WINS
Enter the IP address for the optional secondary
Server IP Address
WINS server.
Configuring the DLC Parameters
58
You can use the web browser interface to configure the data link control
(DLC) parameters.
To configure the DLC parameters
1 Log in to the EasyLAN Wireless web page. For help, see "Logging In to
the EasyLAN Wireless Web Browser Interface" on page 25.
2 Click NetBIOS/NetBEUI/DLC. The NetBIOS IP / NetBEUI / DLC
page appears.
Values
Default
Enable,
Enable
Disable
Enable,
Enable
Disable
Any 15 ASCII
INTERMEC_nnn
characters
nnn where nnnnnn
is the last six digits
of the MAC
address
Any ASCII
INTERMEC
characters
Auto,
Auto
Static
n.n.n.n where n is
0.0.0.0
from 0 to 255
n.n.n.n where n is
0.0.0.0
from 0 to 255
EasyLAN Wireless User's Manual
Advertisement
Table of Contents
Troubleshooting
