Wireless 802.11 Security Settings - Intermec PR2 User Manual

Wireless 802.11 Security Settings

PR2 and PR3 Mobile Receipt Printer User Manual
Wireless 802.11 Network Settings (Continued)
Setting
IP Address (IPv6)
Subnet Mask
You can view and configure wireless 802.11 security settings from:
• the printer web page.
• PrintSet version 5.2 or later.
Wireless 802.11 Security Settings
Setting
Security Type
Association
Pre-Shared Key
Network Key Index Selects the active network key to use
Description
Specifies the unique network level
address assigned to each device in a
TCP/IP network.
Specifies a number that defines the
range of IP addresses that can be
used in a TCP/IP network.
Description
Selects the protocol the radio uses
to verify its identity and makes sure
that it is authorized to
communicate on the wireless
network.
Specifies the security method
(depending on the security type)
used to grant access to the wireless
network:
•
Open/WEP
•
Shared/WEP
•
WPA/TKIP
•
WPA2/AES
For WPA and WPA2 security,
specifies the passphrase that allows
the radio to authenticate over the
wireless network. Range is 8 to 64
characters.
for WEP security. Range is 1 to 4.
Appendix B — Printer Settings
Default
N/A
0.0.0.0
Default
None
Open/WEP
None
None
55