Wireless 802.11 Security Settings - Intermec PM23c User Manual

Appendix B — Default Settings

Wireless 802.11 Security Settings

Wireless 802.11 Security Settings
Setting
Security Type
Association
Pre-Shared Key
Network Key Index
Network Key 1,
Network Key 2,
Network Key 3,
Network Key 4
User Name
Password
Anonymous Name
Inner Authentication
134
This section describes the 802.11 security settings. To view these
settings:
• From the printer Main Menu, select Settings > Communications
> Wireless 802.11 > Security.
• From the printer web page, click the Configure tab >
Communications > Wireless 802.11.
Description
Selects the protocol the radio uses to verify its
identity and makes sure that it is authorized to
communicate on the wireless network.
Selects the security method that the radio uses
to get access to the wireless network.
Defines the passphrase that allows the radio to
authenticate over the wireless network (for
both WPA and WPA2 security). Range is 8 to 64
characters.
Selects the active network key to use for WEP
security. Range is 1 to 4.
Defines a network key that is used for WEP
security. Keys are entered in ASCII or
hexadecimal (preceded by 0x) format.
Sets the name that the printer uses when
logging in to the network. Range is 1 to 96
characters.
Sets the password that the printer uses when
logging in to the network. Range is 1 to 96
characters.
Sets the outer EAP user name that the printer
uses for logging in to the network. Maximum
length is 96 characters.
Selects the authentication method that is used
when the EAP type is EAP-FAST, PEAP, or
TTLS.
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Default
None
Open/WEP
None
1
Empty string
None
None
Empty string
MSCHAPv2