Configuring For Other Systems - Intermec EasyLan AW02 User Manual

Chapter 2 — Configuring EasyLAN Wireless

Configuring for Other Systems

64
4 Select Add Access to Remote Printer.
5 At the Printer Name prompt, type any desired name for the print
queue.
6 At the Printer Server prompt, type:
lp –dLabelPrinter filename
7 Make sure that the Printer Server OS is set to BSD (this is the default
setting).
8 Select Add.
9 To print, use the standard
name\!servicename
where:
name matches the EasyLAN Wireless name as entered in the
hosts table.
servicename is the print service name. For binary graphics files, use the
service BINARY_P1; for text files, use the service
TEXT_P1.
Note: We recommend using the /etc/hosts file for the printer name
rather than NIS or other name services.
Due to a bug in the Sun
releases, you may encounter problems printing very long print jobs. The
workaround is to configure EasyLAN Wireless as an HP JetDirect card
using the HP JetAdmin for UNIX software.
Solaris print queues can also be configured from the UNIX shell using the
command.
lpadmin
You can use EasyLAN Wireless with any computer system that supports
either the lpr/lpd protocol or the HP JetDirect card (the EasyLAN
Wireless parallel port is port 9100). Refer to your system's documentation
for information on configuring
command:
lp
implementation on Solaris 2.4 and earlier
lpd
/ or JetDirect print queues.
lpr lpd
EasyLAN Wireless User's Manual