Configuring For A Netware Network; Configuring The Netware Parameters - Intermec EasyLan AW02 User Manual

Configuring for a NetWare Network

Configuring the NetWare Parameters

EasyLAN Wireless User's Manual
5 (Optional) To make the changes effective immediately, click the link,
Configuration has been modified. The unit must be reset for new
values to take effect. The Reset Server page appears. For help, see the
instructions for resetting the EasyLAN Wireless print server, starting
with Step 4 on page 67.
6 Click another command on the left to continue working, or click
Logout and close your web browser window.
EasyLAN Wireless automatically makes itself known on a NetWare
network. The default NetWare Print Server name is PR1. Note that the
NetWare Print Server name is used for either NDS or bindery mode
configuration.
You can use the web browser interface to change the default settings for
the NetWare network. You can also configure additional queues using the
Novell NWAdmin utility.
Note: Intermec recommends you use the Novell 32-bit client on your
Windows PC instead of the Microsoft NetWare client because it allows
direct configuration of print queues without the need for a Novell utility
like NWAdmin or PCONSOLE.
If you are configuring the first port with the web browser interface, the
NDS Printer Name for this port is automatically assigned as
INTERMECnnnnnn_P1 where nnnnnn is the last six digits of the MAC
address. If you are using an alternate configuration method like
NWAdmin, you may assign any unique name for the printer. For help
configuring the first port, see "Configuring the Parallel Port" on page 47.
You extensively use the Print Server and Printer names while configuring.
Note that these names are actually the names of the EasyLAN Wireless
NetWare services. If desired, you can change the default names using the
web browser interface. For help, see "Configuring the Port Services" on
page 49.
1 Log in to the EasyLAN Wireless web page. For help, see "Logging In to
the EasyLAN Wireless Web Browser Interface" on page 25.
2 Click NetWare. The Configure NetWare page appears.
Chapter 2 — Configuring EasyLAN Wireless
53