Intermec EasyLan AW02 User Manual page 110

Appendix A — Console Commands
98
Wireless Network and Security Console Commands (continued)
Command
set nw ssid mynetwork
set nw wpaauto status
set nw wpagroup status
set nw wpapsk key
sh nw
sh nw auth
sh nw apden
sh nw bssid
sh nw certcn
sh nw certcn2
sh nwcertexp
sh nw enc
sh nw id
sh nw inap
sh nw mode
sh nw radio
sh nw realm
sh nw rts
sh nw speed
sh nw stats
sh nw wpaauto
sh nw wpagroup
Description
Sets the WLAN SSID (network name) for the
wireless network. Use double-quotes if you are using
a space character in the SSID. Where mynetwork is
the SSID. The default is INTERMEC in uppercase.
Enables or disables WPA auto connect mode. If
enabled, EasyLAN Wireless connects to a non-WPA
access point if a WPA-enabled access point is not
available. This is valid only when WPA is enabled
(when the authentication type is TKIP). Where
status is for enabled or
en dis
default is disabled.
Allows group keys to be used for data link
encryption. Where status is
for disabled. The default is disabled.
Sets the WPA-PSK pass phrase or hex key. This
value is used only if the authentication mode is
WPA-PSK. Where key is a pass phrase of 8 to 63
characters or exactly 64 hex characters which
represent the 256-bit PSK value. The default is
Intermec.
Shows a summary of network parameters.
Shows the wireless authentication type.
Shows the access point density.
Shows the MAC address for the access point that
EasyLAN Wireless is set to communicate with.
Shows the first common name check string.
Shows the second common name check string.
Shows the EAP certificate exponent value.
Shows the wireless encryption mode.
Shows the authentication ID (including realm, if
present) for 802.1x EAP authentication.
Shows if the inner authentication mode is PA or
MSCHAP_V2.
Shows if the wireless operating mode is ad-hoc or
infrastructure.
Shows the radio mode of operation.
Shows the realm associated with the authentication
ID, if any.
Shows the wireless RTS threshold.
Shows the maximum wireless data speed (Mbps).
Shows the network I/O statistics.
Shows if WPA auto connect mode is enabled or
disabled.
Shows if WPA group key mode is enabled or
disabled.
EasyLAN Wireless User's Manual
for disabled. The
for enabled or
en dis