Setting Up For A Windows Nt4 Pc - Intermec EasyLan AW02 User Manual

Intermec easylan aw02: user guide

Hide thumbs Also See for EasyLan AW02:

User manual (121 pages)

Quick start manual (20 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

Table of Contents

Chapter 1 — Installing EasyLAN Wireless

10 The dialog box displays the information you have entered. Make sure

that the Protocol field displays RAW, Port 9100. Make sure that the

Device field displays the correct IP address. Click Finish.

11 The dialog box identifies the manufacturer and model of your printer.

(If your printer is not already identified correctly, choose Intermec from

the Manufacturers list and choose your printer from the Printers list.)

Click Have Disk.

12 On the Install From Disk dialog box, click OK.

13 On the Locate Disk dialog box, click Browse and browse to the

directory where you installed InterDriver. The default location is

X:\Intermec\InterDriver\95 98 Me 2000 XP, where X is the drive.

14 On the Install From Disk dialog box, click OK.

15 Select the printer and click Next.

16 On the Use Existing Driver dialog box, select Replace existing driver

and click Next.

17 Follow the next few prompts to set up how the printer will be used.

When prompted to print a test page, select No and click Next.

18 Click Finish.

19 The Digital Signature Not Found dialog box appears. Click Yes. The

InterDriver files are installed. The installation wizard window closes.

20 Print a test page by following these steps:

a From the Printers dialog box, right-click your EasyLAN Wireless

printer and choose Properties.

Note: If the Printers dialog box is not already open on your desktop,

select Start > Settings > Control Panel > Printers.

b On the General tab, click Print Test Page. The test page prints.

You are ready to print to the printer.