Intermec EasyLan AW02 User Manual page 23

EasyLAN Wireless User's Manual
• If EasyLAN Wireless will use static WEP encryption, you may need to
know these parameters:
• Key strength (WEP 128-bit or WEP 64-bit)
• Values for up to 4 WEP keys (entered in Hex values)
• Active WEP key (1, 2, 3, or 4)
• Authentication (open or shared)
• If EasyLAN Wireless will use 802.1x security with TTLS or PEAP, you
may need to know these parameters:
• Inner authentication (PAP or MSCHAP_v2)
• User name and password
• Server common name 1 and server common name 2
• Certificate information (Will you use the current certificate, reinstall
the default certificate, or specify the path and password for another
certificate?)
• You do not need to ask about Encryption Mode because it will be
automatically set to Dynamic WEP.
• If EasyLAN Wireless will use 802.1x security with LEAP, you may need
to know these parameters:
• Inner authentication (PAP or MSCHAP_v2)
• User name and password
• You do not need to ask about Encryption Mode because it will be
automatically set to Dynamic WEP.
• If EasyLAN Wireless will use WPA-Personal or WPA2-Personal, you
need to know the pre-shared key (PSK) used by the access point.
• If EasyLAN Wireless will use WPA-Enterprise or WPA2-Enterprise,
you may need to know these parameters:
• Inner authentication (PAP or MSCHAP_v2)
• User name and password
• Server common name 1 and server common name 2
• Certificate information (Will you use the current certificate, reinstall
the default certificate, or specify the path and password for another
certificate?)
Chapter 1 — Installing EasyLAN Wireless
11