Netbios And Netbeui Console Commands - Intermec EasyLan AW02 User Manual

NetBIOS and NetBEUI Console Commands

EasyLAN Wireless User's Manual
NetWare Console Commands (continued)
Command
set netw se name status
set servi servicename
con string
set servi servicename
netw status
set servi servicename
tree string
sh netw
These commands let you configure and display NetBIOS and NetBEUI
parameters.
NetBIOS and NetBEUI Console Commands
Command
set netbeui status
set netbios dom string
set netbios me method
set netbios pr n.n.n.n
set netbios se n.n.n.n
set servi servicename
netb status
sh netbeui
Appendix A — Console Commands
Description
Enables or disables the specified file server. Where
name is the file server and status is
for disabled. By default, none are enabled or
dis
disabled, because no Netware servers are configured.
Sets NDS context. Where servicename is the service
you are modifying and string is the NDS context.
The default is NULL.
Enables or disables NetWare jobs. Where
servicename is the service you are modifying and
status is for enabled or
en dis
default is enabled for service PR1_P1 and disabled
for all others.
Sets NDS tree. Where servicename is the service you
are modifying and string is the NDS tree. The
default is NULL.
Shows the NetWare parameters.
Description
Enables or disables communication over the
NetBEUI protocol. Where status is
for disabled. The default is enabled.
dis
Sets the name of the domain that contains the PCs
that will print to this printer. Where string is any
string of alphanumeric ASCII characters. The
default is NULL.
Sets the method of getting the WINS server IP
addresses. Where method is
default is .
auto
Sets the IP address of the primary WINS server.
Where n is a number from 0 to 255. The default is
0.0.0.0.
Sets the IP address of the optional secondary WINS
server. Where n is a number from 0 to 255. The
default is 0.0.0.0.
Enables or disables NetBIOS jobs on the specified
service. Where servicename is the service you are
modifying and status is for enabled or
en
disabled. The default is enabled for service
BINARY_P1 and disabled for all others.
Shows the NetBEUI and the NetBIOS parameters.
for enabled or
en
for disabled. The
for enabled or
en
or . The
auto static
for
dis
101