Table of Contents
Advertisement
Appendix A — Console Commands
SNMP Console Commands
104
Your next step is to change the default IP address (0.0.0.0) for Avalanche
Console to the correct IP address.
These commands let you configure and display SNMP parameters.
SNMP Console Commands
Command
set snmp getcomm string
set snmp jetad status
set snmp setcomm1
string
set snmp setcomm2
string
set snmp con string
set snmp loc string
sh snmp
Description
Gets the name of the community. Where string is
any string of alphanumeric ASCII characters. The
default is public.
Enables or disables compatibility for JetAdmin.
Where status is
for enabled or
en
The default is enabled.
Sets the name of community 1. Where string is any
string of alphanumeric ASCII characters.
Sets the name of community 2. Where string is any
string of alphanumeric ASCII characters. The
default is pass.
Sets the System contact string. Where string is any
string of alphanumeric ASCII characters. The
default is NULL.
Sets the System location string. Where string is any
string of alphanumeric ASCII characters. The
default is NULL.
Displays the state of the SNMP protocol.
EasyLAN Wireless User's Manual
for disabled.
dis
Advertisement
Table of Contents
Troubleshooting
