Configuring For Sun Solaris - Intermec EasyLan AW02 User Manual

Configuring for Sun Solaris

EasyLAN Wireless User's Manual
• Activate the queue (Yes)
• Destination host (EasyLAN Wireless IP address; or if you have
configured the /etc/hosts file, use the name of EasyLAN Wireless that
you specified in that file)
• Name of queue on remote printer (BINARY_P1 for binary files or
TEXT_P1 for text files)
• Name of device to add (user selectable; for example, lp0)
8 Print using the
lp –d
Note: The configuration for earlier versions of AIX is slightly different.
You can also configure EasyLAN Wireless as a JetDirect card using AIX.
To do this, refer to your AIX documentation
To use an EasyLAN Wireless with Sun Solaris, first use the Host Manager
in the Admintool utility to add the EasyLAN Wireless IP address and
name to the /etc/hosts file.
To use the Host Manager to add the EasyLAN Wireless IP address
1 Open Host Manager in the Admintool utility. For help, see the
documentation for your Sun Solaris system.
2 Click None – Use /etc files on host.
3 Click Apply.
4 Click Edit, and then click Add Host.
5 Enter the EasyLAN Wireless name as the Host Name (this name is
anything you want it to be, but should not have an underscore [ _ ]
character in it).
6 Enter the IP address and MAC address of EasyLAN Wireless (the MAC
address has the format aa:bb:cc:dd:ee:ff).
7 Click Add.
8 Close the Host Manager windows. Now you are ready to use the Printer
Manager in the Admintool utility.
To use the Printer Manager
1 Open the Printer Manager under Open Windows in the Admintool
utility. For help, see the documentation for your Sun Solaris system.
2 Select Edit.
3 Select Add.
Chapter 2 — Configuring EasyLAN Wireless
command.
63