Netware Console Commands - Intermec EasyLan AW02 User Manual

Appendix A — Console Commands

NetWare Console Commands

100
Parallel Port Console Commands (continued)
Command
set port p1 psta status
set port p1 sojbusy
time
sh port
These commands let you configure and display NetWare parameters.
NetWare Console Commands
Command
cl netw qs server on
service
cl netw se server
set netw ad n
set netw status
set netw fr type
set netw np pserver n
on service
set netw pa password
set netw po n
set netw qs fileserver
on service
set netw re
Description
Enables or disables PJL status initialization on the
parallel port. The default is disabled. This parameter
must remain disabled.
Sets the amount of time (in ms) that the parallel port
waits if the printer is busy when a job starts. The
default is 100 ms.
Shows information about the parallel port, which
EasyLAN Wireless uses to communicate internally
with the printer.
Description
Removes the QServer server on a service. Where
server is the QServer server and service is the service.
Removes the specified NetWare file server from
EasyLAN Wireless access list. Where server is the
NetWare file server.
Sets the advertising frequency of EasyLAN Wireless.
Where n is the advertising frequency in seconds. The
default is 60 seconds.
Enables or disables the NetWare protocol on
EasyLAN Wireless. Where status is
for disabled. The default is enabled.
dis
Sets the NetWare frame type. Where type is
, for Ethernet II,
802.3 eth
for SNAP. The default is
auto
Set NPrinter mode on the specified service. Where
pserver is the NetWare print server, n is the NPrinter
mode, and service is the service you are modifying.
Sets the EasyLAN Wireless login password for the
file server. Where password is the login password.
The default is NULL.
Sets the queue polling time. Where n is the number
of seconds. The default is 4 seconds.
Sets Queue Server mode on the specified service.
Where fileserver is the NetWare file server and service
is the service you are modifying.
Rescans the file servers for new queues.
EasyLAN Wireless User's Manual
for enabled or
en
,
802.2
for auto, or
au sna
.