HYRobotics NEXIA-SY Series User Manual page 9

When setting up the robot arm in the mold area by manual operation, take really care that
the robot arm does not contact with the mold or tie bar. Make sure to operate the robot
outside the safety guard.
Do not use an operation fluid other than clean compressed air
Regulate the air pressure as specified.
If don't operate the robot for several days or long period of the time due to plant shutoff
or vacation, Turn OFF the control power.
Proper working clothes, helmet and protective shoes required for operating and setting up
the robot (Personal protective Equipment)
Do not operator robot without safety helmet or shoes.
Do not wear necktie and necklace, bracelet etc
!
CAUTION
vii