P01 Group Start And Stop Control - INVT Goodrive100-PV Series Operation Manual

Goodrive100-PV Series Solar Pump Inverter
Function
code
P00.15 parameter
autotuning
Function
P00.18 parameter

P01 group Start and stop control

Function
code
P01.08 Stop mode
Name

Do not change the setting of the parameter
because reverse running is not allowed in
water pump application scenarios.
2: Disable reverse running. It can be used in
some special scenarios where reverse
running is disallowed.
0: No operation
1: Rotation autotuning
Comprehensive
autotuning. It is recommended to use
rotation autotuning when high control
Motor
accuracy is needed.
2: Static autotuning
Used in scenarios where the motor cannot
be disconnected from load.
3: Static autotuning 2
Empty-load current and mutual inductance
are not autotuned.
0: No operation
1: Restore default values
2: Clear fault records
Note:

After the selected operation is performed,
the function code is automatically restored
restore
to 0.

Restoring the default values may delete the
user password. Exercise caution before
using this function.
Name
0: Decelerate to stop. When a stop
command takes effect, the inverter lowers
output frequency based on the DEC mode
and the defined DEC time; when the
frequency drops to 0Hz, the inverter stops.
Description
motor
Description
-25-
Function parameter list
Default Modify
parameter
0
0
Default Modify
0
◎
◎
○