P01 Group Start And Stop Control; P02 Group Parameters Of Motor 1 - INVT SPC Series Operation Manual

SPC Series Solar Pump Inverter

P01 group Start and stop control

Function
code
P01.08
Terminal-base
P01.18
protection at
P01.21

P02 group Parameters of motor 1

Function
code
P02.00
Rated power of
P02.01
P02.02 frequency of
Name
0: Decelerate to stop. When a stop
command takes effect, the inverter
lowers output frequency based on the
DEC mode and the defined DEC time;
when the frequency drops to 0Hz, the
Stop mode
inverter stops.
1: Coast to stop. When a stop command
takes effect, the inverter stops output
immediately. and the load coasts to stop
according to mechanical inertia.
0: The terminal running command is
d running
invalid at power-on
command
1: The terminal running command is valid
at power-on
power-on
Power-off
0: Disable restart
restart
1: Enable restart
selection
Name
0: Asynchronous motor (AM)
Motor type
1: Synchronous motor (SM)
0.1–3000.0kW
AM
Rated
0.01Hz–P00.03
AM
Description
Description
Used to set AM
parameters.
To ensure the control
performance, set
P02.01–P02.05
correctly according to
the information on the
nameplate of the AM.
The inverter provides
-23-
Function parameter list
Default Modify
○
0
○
1
○
1
Default Modify
◎
1
Model
◎
depended
◎
110.00Hz