Table of Contents
Advertisement
Goodrive100-PV Series Solar Pump Inverter
Further information
Appendix E Further information
E.1 Product and service quiries
If you have any queries about the product, contact the local INVT office. Please provide the
model and serial number of the product you query about. You can visit
www.invt.com
to find a
list of INVT offices.
E.2 Feedback of INVT inverter manuals
Your comments on our manuals are welcome. Visit www.invt.com, directly contact online
service personnel or choose Contact Us to obtain contact information.
E.3 Document library on the Internet
You can find manuals and other product documents in PDF format on the Internet. Visit
www.invt.com
and choose Support > Download.
-79-
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Goodrive100-PV Series and is the answer not in the manual?
Questions and answers
I want to connect a low water level sensor to GD100-PV invt how it supposed to do
The low water level sensor should be connected to the INVT Goodrive100-PV Series inverter at the designated terminal. Based on the standard wiring diagram:
1. Identify the low water level switch terminals.
2. Connect the common terminal of the sensor to the COM terminal on the inverter.
3. Connect the sensor output to the appropriate input terminal (e.g., S1 or S4) on the inverter.
4. Ensure wiring is secure and correctly configured according to the installation guidelines.
This setup allows the inverter to receive signals from the low water level sensor and respond accordingly.
This answer is automatically generated
@Hamse Ismael