P19 Group Functions For Voltage Boost (Inverter Module Communicates With Boost Module Through Rs485 Communication) - INVT Goodrive100-PV Series Operation Manual

Goodrive100-PV Series Solar Pump Inverter
Function
code
Actual pump
P18.11
P18.12 Actual pump lift
High-order bits
P18.13 in total pump
Low-order bits in
P18.14
total pump flow
Reset total
P18.15
pump flow
P19 group Functions for voltage boost (inverter module communicates with boost
module through RS485 communication)
Function
code
Boost voltage
P19.00
Boost voltage
P19.01
Boost current
P19.02
Boost current
P19.03
Output current
upper limit of
P19.04
boost voltage
Name
with the boost module.
1: Detect
configured with the boost module.

Q
flow

H
Used to display the 16 high-order bits of
the total pump flow. Unit: cubic meter
flow
Used to display the 16 low-order bits of
the total pump flow. Unit: cubic meter.
Total pump flow = P18.13*65535 +
P18.14
When it is set to 1, the total pump flow
can be reset.
cleared and then accumulated again.
After the resetting succeeds,
automatically changed to 0.
Name
0.000–65.535
loop KP
0.000–65.535
loop KI
0.000–65.535
loop KP
0.000–65.535
loop KI
Output upper limit of mppt voltage loop
PI, upper limit of the boost current loop
reference current.
loop PI P19.05–15.0A
Description
that the
Q * f / f
N N
Unit: cubic meter/hour
2
)
0.9 H * ( / f f
N N
P18.13
Description
-50-
Function parameter list
system is not
Unit: meter
and P18.14 are
P18.15 is
Default Modify
●
0.0
●
0.0
●
0
●
0.0
◎
0
Default Modify
○
0.500
○
0.080
○
0.010
○
0.010
○
12.0A