Table of Contents
Advertisement
Goodrive100-PV Series Solar Pump Inverter
Appendix D Dimension drawings ........................................................................................ 73
D.1 External keypad structure ........................................................................................... 73
D.2 Dimensions of 0.4-2.2kW models ............................................................................... 74
D.3 Dimensions of 1.5-200kW models .............................................................................. 76
Appendix E Further information .......................................................................................... 79
E.1 Product and service quiries ......................................................................................... 79
E.2 Feedback of INVT inverter manuals ............................................................................ 79
E.3 Document library on the Internet ................................................................................. 79
-iii-
Contents
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Goodrive100-PV Series and is the answer not in the manual?
Questions and answers
I want to connect a low water level sensor to GD100-PV invt how it supposed to do
The low water level sensor should be connected to the INVT Goodrive100-PV Series inverter at the designated terminal. Based on the standard wiring diagram:
1. Identify the low water level switch terminals.
2. Connect the common terminal of the sensor to the COM terminal on the inverter.
3. Connect the sensor output to the appropriate input terminal (e.g., S1 or S4) on the inverter.
4. Ensure wiring is secure and correctly configured according to the installation guidelines.
This setup allows the inverter to receive signals from the low water level sensor and respond accordingly.
This answer is automatically generated