Table of Contents
Advertisement
Goodrive100-PV Series Solar Pump Inverter
Dimensions of IP54 inverter (unit: mm):
Power (kW)
37
30
22
18.5
15
11
7.5
5.5
4
2.2
1.5
0.75
0.4
Note:
The inverters that do not implement auto switching do not have the suffix -AS.
The inverters ≤ 2.2kW are equipped with the boost module as standard configuration,
supporting auto switching.
For -S25 and -SS25 models equipped with the boost module, the DC input voltage
Model
GD100-037G-45-PV-AS
GD100-030G-45-PV-AS
GD100-022G-45-PV-AS
GD100-018G-45-PV-AS
GD100-015G-45-PV-AS
GD100-011G-45-PV-AS
GD100-7R5G-45-PV-AS
GD100-7R5G-25-PV-AS
GD100-5R5G-45-PV-AS
GD100-5R5G-25-PV-AS
GD100-004G-45-PV-AS
GD100-004G-25-PV-AS
GD100-2R2G-45-PV-AS
GD100-2R2G-S25-PV-AS
GD100-2R2G-SS25-PV-AS
GD100-1R5G-45-PV-AS
GD100-1R5G-S25-PV-AS
GD100-1R5G-SS25-PV-AS
GD100-0R7G-45-PV-AS
GD100-0R7G-S25-PV-AS
GD100-0R7G-SS25-PV-AS
GD100-0R4G-S25-PV-AS
GD100-0R4G-SS25-PV-AS
Power frequency & PV switching solution
W
650
1000
550
900
550
700
-70-
H
D
A
250
400
225
400
200
400
B
975
875
675
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Goodrive100-PV Series and is the answer not in the manual?
Questions and answers
I want to connect a low water level sensor to GD100-PV invt how it supposed to do
The low water level sensor should be connected to the INVT Goodrive100-PV Series inverter at the designated terminal. Based on the standard wiring diagram:
1. Identify the low water level switch terminals.
2. Connect the common terminal of the sensor to the COM terminal on the inverter.
3. Connect the sensor output to the appropriate input terminal (e.g., S1 or S4) on the inverter.
4. Ensure wiring is secure and correctly configured according to the installation guidelines.
This setup allows the inverter to receive signals from the low water level sensor and respond accordingly.
This answer is automatically generated
@Hamse Ismael