INVT Goodrive100-PV Series Operation Manual page 44

Goodrive100-PV Series Solar Pump Inverter
Function
code
PI control
P15.03
deviation limit
PID output
P15.04 upper limit
frequency
PID output
P15.05 lower limit
frequency
P15.06
P15.07
P15.08
Name
0.0–100.0% (100.0% corresponds to
P15.02)
PI adjustment is performed only when the
ratio of the difference between the actual
voltage and reference voltage to the
reference voltage, which is abs (Actual
voltage – Reference voltage) * 100.0% /
(Reference voltage), exceeds P15.03. The
default value is 0.0%.
abs: absolute value
P15.05–100.0% (100.0% corresponds to
P00.03)
P15.04
target frequency, and 100.0% corresponds
to P00.03.
After PI adjustment, the target frequency
cannot exceed the upper limit.
0.0%–P15.04
P00.03)
P15.05
target frequency, and 100.0% corresponds
to P00.03.
After PI adjustment, the target frequency
cannot be less than the lower limit.
0.00–100.00
Proportion coefficient 1 of the target
KP1 frequency.
A greater value indicates stronger effect and
faster adjustment.
0.00–100.00
Integral coefficient 1 of target frequency
KI1
A greater value indicates stronger effect and
faster adjustment.
0.00–100.00
Proportion coefficient 2 of target frequency.
KP2
A greater value indicates stronger effect and
faster adjustment.
Description
is used to limit the Max. value of
(100.0%
is used to limit the Min. value of
-40-
Function parameter list
corresponds to
Default Modify
○
0.0%
○
100.0%
○
20.0%
○
5.00
○
5.00
○
35.00