Table of Contents
Advertisement
Goodrive100-PV Series Solar Pump Inverter
Model
GD100-045G-4-PV-AS
GD100-055G-4-PV-AS
GD100-075G-4-PV-AS
GD100-090G-4-PV-AS
GD100-110G-4-PV-AS
GD100-132G-4-PV-AS
GD100-160G-4-PV-AS
GD100-185G-4-PV-AS
GD100-200G-4-PV-AS
C.2 IP54 protection-level inverters
INVT provides IP54 protection-level inverters, which are divided into two types: One type
implements auto power frequency & PV switching and the other type does not implement auto
switching.
The following figure shows the dimensions of the inverter.
AC
breaker
breaker
(A)
200
1000VDC
200
1000VDC
250
315
1000VDC
350
350
1000VDC
400
1000VDC
500
500
1000VDC
So lar P um p In v erte r
Figure C–3 Dimensions of IP54 inverter
-69-
Power frequency & PV switching solution
AC
DC
contactor
(A)
160A/
170
170
250A/
205
245
350A/
265
400A/
330
400
550A/
500
600A/
500
Diode
SPD
Fuse
160A/
1600V
250A/
1600V
350A/
1600V
400A/
1600V
550A/
1600V
600A/
1600V
I
/
FAV
V
RRM
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Goodrive100-PV Series and is the answer not in the manual?
Questions and answers
I want to connect a low water level sensor to GD100-PV invt how it supposed to do
The low water level sensor should be connected to the INVT Goodrive100-PV Series inverter at the designated terminal. Based on the standard wiring diagram:
1. Identify the low water level switch terminals.
2. Connect the common terminal of the sensor to the COM terminal on the inverter.
3. Connect the sensor output to the appropriate input terminal (e.g., S1 or S4) on the inverter.
4. Ensure wiring is secure and correctly configured according to the installation guidelines.
This setup allows the inverter to receive signals from the low water level sensor and respond accordingly.
This answer is automatically generated