Siemens CU240B-2 Parameter Manual page 369

r9742.0...15 CO/BO: SI Motion drive-integrated status signals (processor 2) / SI Mtn int stat P2
CU240E-2 DP F Access level: 4
CU240E-2 F
Can be changed: -
Units group: -
Min
-
Description: Status signal for safety-relevant motion monitoring functions integrated in the drive.
Bit field: Bit Signal name
00 STO active
01 SS1 active
04 SLS active
07 Internal event
09 Active SLS stage bit 0
10 Active SLS stage bit 1
15 SSM (speed below limit value)
Notice: Re bit 07:
An internal event is displayed if a STOP A ... F is active.
The signal state behaves in an opposite way to the PROFIsafe Standard.
Note: This parameter is only supplied with actual values if SI Motion functions are active. For Safety Integrated Basic
Functions (STO), the value is equal to zero.
p9761 SI password input / SI password inp
CU240E-2 Access level: 3
CU240E-2 DP
Can be changed: C, T
CU240E-2 DP F
Units group: -
CU240E-2 F
Min
0000 hex
Description: Enters the Safety Integrated password.
Dependency: Refer to: F01659
Note: It is not possible to change Safety Integrated parameters until the Safety Integrated password has been entered.
p9762 SI password new / SI password new
CU240E-2 Access level: 3
CU240E-2 DP
Can be changed: C(95)
CU240E-2 DP F
Units group: -
CU240E-2 F
Min
0000 hex
Description: Enters a new Safety Integrated password.
Dependency: A change made to the Safety Integrated password must be acknowledged in the following parameter:
Refer to: p9763
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
Calculated: -
Scaling: -
Unit selection: -
Max
-
1 signal
Yes
Yes
Yes
No
Set
Set
Yes
Calculated: -
Scaling: -
Unit selection: -
Max
FFFF FFFF hex
Calculated: -
Scaling: -
Unit selection: -
Max
FFFF FFFF hex
Parameters
List of Parameters
Data type: Unsigned32
Data set: -
Factory setting
-
0 signal
No
No
No
Yes
Not set
Not set
No
Data type: Unsigned32
Data set: -
Factory setting
0000 hex
Data type: Unsigned32
Data set: -
Factory setting
0000 hex
FP
-
-
-
-
-
-
2860
1-369