Siemens CU240B-2 Parameter Manual page 308

Parameters
List of Parameters
p2263 Technology controller type / Tec_ctrl type
Access level: 3
Can be changed: T
Units group: -
Min
0
Description: Sets the technology controller type.
Value: 0:
1:
p2264[0...n] CI: Technology controller actual value / Tec_ctrl act val
Access level: 2
Can be changed: U, T
Units group: -
Min
-
Description: Sets the signal source for the actual value of the technology controller.
p2265 Technology controller actual value filter time constant / Tec_ctrl act T
Access level: 2
Can be changed: U, T
Units group: -
Min
0.000 [s]
Description: Sets the time constant for the actual value filter (PT1) of the technology controller.
r2266 CO: Technology controller actual value after filter / Tec_ctr act aftFlt
Access level: 3
Can be changed: -
Units group: 9_1
Min
- [%]
Description: Displays the smoothed actual value after the filter (PT1) of the technology controller
p2267 Technology controller upper limit actual value / Tec_ctrl u_lim act
Access level: 3
Can be changed: U, T
Units group: 9_1
Min
-200.00 [%]
Description: Sets the upper limit for the actual value signal of the technology controller.
Dependency: Refer to: p2264, p2265, p2271
Refer to: F07426
Notice: If the actual value exceeds this upper limit, this results in fault F07426.
1-308
D component in the actual value signal
D component in the fault signal
SINAMICS G120 / Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
Calculated: -
Scaling: -
Unit selection: -
Max
1
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
60.000 [s]
Calculated: -
Scaling: PERCENT
Unit selection: p0595
Max
- [%]
Calculated: -
Scaling: PERCENT
Unit selection: p0595
Max
200.00 [%]
Data type: Integer16
Data set: -
Factory setting
0
Data type: U32 / FloatingPoint32
Data set: CDS, p0170
Factory setting
0
Data type: FloatingPoint32
Data set: -
Factory setting
0.000 [s]
Data type: FloatingPoint32
Data set: -
Factory setting
- [%]
Data type: FloatingPoint32
Data set: -
Factory setting
100.00 [%]
© Siemens AG 2011 All Rights Reserved