Siemens CU240B-2 Parameter Manual page 315

r2349.0...12 CO/BO: Technology controller status word / Tec_ctrl status
Access level: 3
Can be changed: -
Units group: -
Min
-
Description: Displays the status word of the technology controller.
Bit field: Bit Signal name
00 Technology controller de-activated
01 Technology controller limited
02 Technology controller, motorized potentiom-
eter limited max.
03 Technology controller, motorized potentiom-
eter limited min.
04 Technology controller speed setpoint total in
setpoint channel
05 Technology controller RFG bypassed in the
setpoint channel
06 Technology controller starting value at the
current limit
08 Technology controller actual value at the
minimum
09 Technology controller actual value at the
maximum
10 Technology controller output at the mini-
mum
11 Technology controller output at the maxi-
mum
12 Fault response active
p2900[0...n] CO: Fixed value 1 [%] / Fixed value 1 [%]
Access level: 3
Can be changed: U, T
Units group: -
Min
-10000.00 [%]
Description: Sets a fixed percentage.
Dependency: Refer to: p2901, p2930
Notice: A BICO interconnection to a parameter that belongs to a drive data set always acts on the effective data set.
Note: The value can be used to interconnect a scaling function (e.g. scaling of the main setpoint)
p2901[0...n] CO: Fixed value 2 [%] / Fixed value 2 [%]
Access level: 3
Can be changed: U, T
Units group: -
Min
-10000.00 [%]
Description: Sets a fixed percentage.
Dependency: Refer to: p2900, p2930
Notice: A BICO interconnection to a parameter that belongs to a drive data set always acts on the effective data set.
Note: The value can be used to interconnect a scaling function (e.g. scaling of the supplementary setpoint)
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
Calculated: -
Scaling: -
Unit selection: -
Max
-
1 signal
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
10000.00 [%]
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
10000.00 [%]
Parameters
List of Parameters
Data type: Unsigned32
Data set: -
Factory setting
-
0 signal
No
No
No
No
No
No
Yes
No
No
No
No
No
Data type: FloatingPoint32
Data set: DDS, p0180
Factory setting
0.00 [%]
Data type: FloatingPoint32
Data set: DDS, p0180
Factory setting
0.00 [%]
FP
-
-
-
-
-
-
-
-
-
-
-
-
1-315